///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2013-04-03 update from V4.0.0.7 to V4.0.0.8
1.Fixd bug: CPU usage is too high when preview.

2.Fixed bug:Can not connect to sign for some models of modem.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2012-12-20 update from V4.0.0.6 to V4.0.0.7
1.Fixed bug: If add two document, and change the language, the menu 'Help' confusion.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2011-11-09 update from V4.0.0.5 to V4.0.0.6
1)Upgrade: Change the interface for editing message, it will look more clear.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2011-08-19 update from V4.0.0.4 to V4.0.0.5
1)Fixed bug:
When execute menu "Communication Settings > Communication Mode Settings", it will show dialog "Communication option...". 
	Check "TCP/IP" in "Communication Mode", and then click "Add Group..." button, when the number of IP Address which input in "IP Address" greater than 21, and last click "OK" button, the software will collapse.

2)Fixed bug:
Correct the spelling mistake from "Auguest" to "August".
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////




///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-11-23 update from V4.0.0.3 to V4.0.0.4
1)Fixed bug: GSM Modem can work, but sometimes the normal MODEM can not dial up. It is maybe caused by checking whether the MODEM is GSM.


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:

IDS_STRINGTABLE_33485=Now PC is connected with moving-sign by GPRS


2)Fixed bug:
In version V4.0.0.3, when user change the language to another, and then insert week / month, it still display the old language till close software and re-open it. Now correct it.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-11-16 update from V4.0.0.2 to V4.0.0.3
1)Upgrade: The sign's bios has been natived to display week/month, but software has not been natived to display week/month

If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:

IDS_STRINGTABLE_33442=Sun
IDS_STRINGTABLE_33443=Mon
IDS_STRINGTABLE_33444=Tue
IDS_STRINGTABLE_33445=Wed
IDS_STRINGTABLE_33446=Thu
IDS_STRINGTABLE_33447=Fri
IDS_STRINGTABLE_33448=Sat
IDS_STRINGTABLE_33449=January
IDS_STRINGTABLE_33450=February
IDS_STRINGTABLE_33451=March
IDS_STRINGTABLE_33452=April
IDS_STRINGTABLE_33453=May
IDS_STRINGTABLE_33454=June
IDS_STRINGTABLE_33455=July
IDS_STRINGTABLE_33456=Auguest
IDS_STRINGTABLE_33457=September
IDS_STRINGTABLE_33458=October
IDS_STRINGTABLE_33459=November
IDS_STRINGTABLE_33460=December
IDS_STRINGTABLE_33461=Jan
IDS_STRINGTABLE_33462=Feb
IDS_STRINGTABLE_33463=Mar
IDS_STRINGTABLE_33464=Apr
IDS_STRINGTABLE_33465=May
IDS_STRINGTABLE_33466=Jun
IDS_STRINGTABLE_33467=Jul
IDS_STRINGTABLE_33468=Aug
IDS_STRINGTABLE_33469=Sep
IDS_STRINGTABLE_33470=Oct
IDS_STRINGTABLE_33471=Nov
IDS_STRINGTABLE_33472=Dec
IDS_STRINGTABLE_33473=AM
IDS_STRINGTABLE_33474=A
IDS_STRINGTABLE_33475=PM
IDS_STRINGTABLE_33476=P
IDS_STRINGTABLE_33477=am
IDS_STRINGTABLE_33478=a
IDS_STRINGTABLE_33479=pm
IDS_STRINGTABLE_33480=p
IDS_STRINGTABLE_33481=st
IDS_STRINGTABLE_33482=nd
IDS_STRINGTABLE_33483=rd
IDS_STRINGTABLE_33484=th
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-11-04 update from V4.0.0.1 to V4.0.0.2
1)Fixed bug: when use GSM modem, sometimes cannot dial up.
2)When use LAN, now user can break the connection. In old version, user cannot break the connection till the timeout.
3)For GPRS, upgrade DTU dll. 
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-08-07 update from V4.0.0.0 to V4.0.0.1
1)For MCS protocol, set the default color to RED
2)Fixed bug: when draw picture, execute menu 'undo/redo', program will collapse.
3)For MCS protocol, disable character '_' as file lable

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-08-05 update from V3.2.8.0 to V4.0.0.0
For support MCS protocol, update it.


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [String Table] as follow, and translate these sentences to native lauguage:
IDS_CLR_PROPERTY_18(33403)=[WHT]
IDS_CLR_PROPERTY_19(33404)=[BLU]
IDS_CLR_PROPERTY_20(33405)=[CYN]
IDS_CLR_PROPERTY_21(33406)=[PUR]
IDS_CLR_PROPERTY_22(33407)=[INV1]
IDS_CLR_PROPERTY_23(33408)=[INV2]
IDS_CLR_PROPERTY_24(33409)=[INV3]
IDS_CLR_PROPERTY_25(33410)=[INV4]
IDS_CLR_PROPERTY_26(33411)=[INV5]
IDS_CLR_PROPERTY_27(33412)=[INV6]
IDS_CLR_PROPERTY_28(33413)=[INV7]
IDS_CLR_PROPERTY_29(33414)=[INV8]
IDS_CLR_PROPERTY_30(33415)=[INV9]
IDS_DISK_FILE_IS_MCS_SOFTWARE_IS_E2000(33416)=The disk file is for MCS, but now software is set for E2000, there are some tiny differences, such as colo(u)r!
IDS_DISK_FILE_IS_E2000_SOFTWARE_IS_MCS(33417)=The disk file is for E2000, but now software is set for MCS, there are some tiny differences, such as colo(u)r!
IDS_FILE_LABLE_NAME_BLANK(33418)=Sorry, the file lable name can not be left blank.
IDS_FILE_NOT_EXIST_IN_WORK_AREA(33419)=Text file '%s' in not in work area, please ensure this file is exist in sign. Are you sure to add this file to run sequence?
IDS_SELECT_ITEM_TO_BE_REMOVED(33420)=Please select one item to be removed firstly!
IDS_SELECT_ITEM_TO_BE_EDIT(33421)=Please select one item to be edited firstly!
IDS_SET_RUN_SEQUENCE(33422)=Set run sequence
IDS_SEND_ALL_MCS(33423)=Send all of text files, graphics
IDS_CLIPBOARD_DATA_TOO_NEW(33424)=Sorry, the data of clipboard is generate by NEW VERSION of this program. Please use the newish program to paste it!
IDS_NOT_FOUND_MCSOCX(33425)=Can not find resource for MCSOCX!
IDS_LOAD_MCSOCX_FAILED(33426)=Load resource for MCSOCX failed!
IDS_WRITE_MCSOCX_TO_FILE_FAILED(33427)=Write resource for MCSOCX to file '%s' failed!
IDS_LOAD_MCS_FILE_FAILED(33428)=Load file %s failed!
IDS_REGISTER_OCX_FAILED(33429)=Register file %s failed!
IDS_REGISTER_NO_DLLREGISTERSERVER(33430)=Register file %s failed because of can not fetch function 'DllRegisterServer'!
IDS_TO_BE_REGISTER_OCX(33431)=Create stock ocx failed. Now will register stock ocx!
IDS_REGISTER_FAILED_SOFTWARE_EXIT(33432)=Register stock ocx failed because of %s. Now program will exit!
IDS_ALL_ARE_OVER(33433)=All are over!
IDS_CALL_STARTSEND_FIRSTLY_MCS(33434)=Please call method 'StartSend' firstly!
IDS_SIGN_ADDRESS_INVALID_MCS(33435)=The sign address is invalid, please input like this '1,0A,64'.
IDS_IS_IN_SENDING_MCS(33436)=Is in sending the other data, please wait. If you want to cancel the previous data, please call method 'StopSend' firstly!
IDS_COM_HANDLE_INVALID(33437)=The COM handle is invalid!
IDS_CHANGE_BAUDRATE_SIGN_ADDRESS_INVALID_MCS(33438)=The parameter is invalid: new sign address and old sign address can't be zero, and new sign address must not be same with old sign address!
IDS_IS_STOP_SENDING(33439)=Is stop sending...
IDS_STOP_SEND_OVER(33440)=Stop send over!
IDS_NO_TEXT_FILE_TO_SENT(33441)=No text file in work area, stop send.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-07-22 update from V3.2.7.0 to V3.2.8.0
1)When paste data or open disk file(*.emt), software will judge wether is the font exist, if the font do not exist, software will replace it with font 'SS7'.   

How to recur this problem: 
	firstly, user create emt file for sign(32(H) * 160(W)), and use font 'AR24', 
	and then copy these data to clipboard,  
	and then create emt file for sign(16(H) * 160(W)), 
	lastly, paste these data from clipboard to this file.  Because the E2000 sign(height of sign is 16) can not support font 'AR24', so these data will disappear.

2)When input huge characters, the response of software will slower. Now correct it.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////




///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2009-02-16 update from V3.2.6.0 to V3.2.7.0
1)Add new function - check modem status, and if needed, let user to input pin code
When communication with sign by Modem, program will test to see if modem is properly connected. 
If the modem is GSM Modem, software will check if pin code is needed, if needed, it will let user to input the pin code. 
Software will check if GSM modem is accepted to GSM network.
Software will check the GSM's signal strength


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:
IDD190_Title=Pin Code
IDD190_1=OK
IDD190_2=Cancel
IDD190_1185=Please input Pin code:
IDD190_1208=Warning: If failed 3 times, the SIM card will be locked. If the SIM card be locked, please use PUK code to unlock it. If you want to exit the Pin Code check, please press 'Cancel' button.


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [String Table] as follow, and translate these sentences to native lauguage:
IDS_STRINGTABLE_33382=Modem is alive
IDS_STRINGTABLE_33383=Modem is not alive
IDS_STRINGTABLE_33384=Sorry, Pin Code can not be left blank!
IDS_STRINGTABLE_33385=Connect Status:\rIs checking modem status, please waiting...
IDS_STRINGTABLE_33386=Connect Status:\rCheck modem status over
IDS_STRINGTABLE_33387=Modem maybe not GSM Modem, or not insert SIM Card in GSM Modem!
IDS_STRINGTABLE_33388=Pin Code needed: No
IDS_STRINGTABLE_33389=Pin Code needed: Yes(Cancelled by user)
IDS_STRINGTABLE_33390=Pin Code needed: Error
IDS_STRINGTABLE_33391=Pin Code needed: Yes
IDS_STRINGTABLE_33392=Modem registered to network: No
IDS_STRINGTABLE_33393=Modem registered to network: Yes
IDS_STRINGTABLE_33394=Signal strength: 
IDS_STRINGTABLE_33395=Unknow
IDS_STRINGTABLE_33396=Bad
IDS_STRINGTABLE_33397=Acceptable
IDS_STRINGTABLE_33398=Good
IDS_STRINGTABLE_33399=Very Good
IDS_STRINGTABLE_33400=Perfect
IDS_STRINGTABLE_33401=Modem status is unknow
IDS_STRINGTABLE_33402=GSM modem status is unknow
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-11-08 update from V3.2.5.0 to V3.2.6.0
1)Fixed one bug: When insert In-Counter with HH:MM:SS format, program will insert one celsius. Because the sign's bios can not support this format, now disable this format.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////





///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-10-15 update from V3.2.4.0 to V3.2.5.0
Got rid of the limitation for the sign's width and sign's height.
In the old version, the width of sign must be in the ranging between 8 and 600, now the only limitation is must be more than one pixel.
In the old version, the height must be 16, 24, or 32, now the only limitation is must be more than one pixel



If the sign's height <= 16, software will use E2000fnt.bin as the font file
If the sign's height > 16 and height <= 24, software will use E3000fnt.bin as the font file
If the sign's height > 24, software will use E4000fnt.bin as the font file




If user has translated file "Multi_eng.ini" to native lauguage, please change these sentences:
IDS_STRINGTABLE_32905=Sorry,the range of sign's width is from 8 to 600,Please re-enter!
IDS_STRINGTABLE_32906=Sorry,The height of sign only can equal to 16,24,32,40,Please re-enter!

to:

IDS_STRINGTABLE_32905=Sorry, the sign's width can not less than 1. Please re-enter!
IDS_STRINGTABLE_32906=Sorry, the height of sign can not less than 1. Please re-enter!

and then translate these sentences to native lauguage:
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-08-29 Update from V3.2.3.0 to V3.2.4.0
1)New Function: User can send the current editing text file to moving-sign directly and display it, but if the text file inlcude GRAPHIC, it will not send the GAPHIC file.
This function is only appear on main toolbar, and it has not corresponding menu item.


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:
IDS_STRINGTABLE_33379=Send current editing text file to Moving-Sign
IDS_STRINGTABLE_33380=Send current editing text file
IDS_STRINGTABLE_33381=Sending current editing text file '%s' to address #%d
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////




///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-07-17 Update from V3.2.2.0 to V3.2.3.0
1)New Function: Add new format for Decounter : With HH:MM:SS.	User can use this format with 'Decounter : With Days' together


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:
IDS_STRINGTABLE_33378=With HH:MM:SS



2)Fixed one bug : This bug is start from V3.19
For example: When user set the current font to SF15, and input some characters, such as "JD",  when input SPACE character, the font will be set to the default font( this default font is set in Software.ini, such as SS7).
Now when input SPACE character, the current font still is SF15.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-04-28 Update from V3.2.1.0 to V3.2.2.0
1)Fixed one bug: Use TCP/IP communication mode, when a TCP/IP group has more than one IP Address, if send message to one IP Address failed, program will not send message to the next IP Address.

2)New Function: Add a new communication mode : GPRS Modem


If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" in section [Dialog String] as follow, and translate these sentences to native lauguage:
IDD184_Title=GPRS Group Edit
IDD184_2=Close
IDD184_1194=Available GPRS Modem
IDD184_1196=Add
IDD184_1197=Edit
IDD184_1198=Delete


IDD185_Title=Name
IDD185_1=OK
IDD185_2=Cancel
IDD185_1199=Name



IDD186_Title=Connection
IDD186_2=Cancel
IDD186_1203=Available connection from GPRS client
IDD186_1206=Refresh
IDD186_1205=Detail





If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:
IDS_STRINGTABLE_33347=IP address List
IDS_STRINGTABLE_33348=Available GPRS Group
IDS_STRINGTABLE_33349=IP Port
IDS_STRINGTABLE_33350=Server Port
IDS_STRINGTABLE_33351=Sorry, the name for GPRS Group can not be left blank!
IDS_STRINGTABLE_33352=Sorry, this name(%s) for GPRS Group has exist. Please input another name.
IDS_STRINGTABLE_33353=Add GPRS Group
IDS_STRINGTABLE_33354=Input the name for new GPRS Group
IDS_STRINGTABLE_33355=Edit GPRS Group Name
IDS_STRINGTABLE_33356=Input new name for this GPRS Group
IDS_STRINGTABLE_33357=The device name for GPRS Modem can not be left blank!
IDS_STRINGTABLE_33358=This GPRS Modem has exist.
IDS_STRINGTABLE_33359=Add New GPRS Modem to Group
IDS_STRINGTABLE_33360=Input the device name of GPRS Modem
IDS_STRINGTABLE_33361=Edit Device Name of GPRS Modem
IDS_STRINGTABLE_33362=Are you sure to delete this item?
IDS_STRINGTABLE_33363=GPRS Group & Addr.
IDS_STRINGTABLE_33364=GPRS Group
IDS_STRINGTABLE_33365=Pease select one GPRS group that will receive message firstly!
IDS_STRINGTABLE_33366=Sorry, the GPRS Group(%s) is not exist!
IDS_STRINGTABLE_33367=to
IDS_STRINGTABLE_33368=You have change the communication mode to non-GPRS mode, now program will stop the thread for monitoring the connection from GPRS Modem(client).
IDS_STRINGTABLE_33369=You have change the server port(Old is %d, now is %d), program will stop the thread(monitoring the connection from client) and restart it. This operation will cause lost all connection from client which has established.\n IMPORTANT: If you change the server port in program, you must also change the server port in GPRS Modem, otherwise the client will not connect to server.
IDS_STRINGTABLE_33370=You have change the communication mode to GPRS mode, now program will start the thread for monitoring the connection from GPRS Modem(client).
IDS_STRINGTABLE_33371=The connection from device %s not found!
IDS_STRINGTABLE_33372=Detail for connection from device %s:\n    IP Address : \t%s\n    Device ID : \t%s\n    Device Type : \t%s\n    Phone : \t\t%s
IDS_STRINGTABLE_33373=Detail
IDS_STRINGTABLE_33374=The client  %s has connected to server.
IDS_STRINGTABLE_33375=The client %s has not connect to server.  Please wait a moment and try again!
IDS_STRINGTABLE_33376=Send message to client %s failed!
IDS_STRINGTABLE_33377=%s in group %s




If user has translated file "Multi_eng.ini" to native lauguage, please modify these sectences as follow , and translate these sentences to native lauguage:
IDS_STRINGTABLE_32984=The %dth sending %s (Total FrameS: %d,  Now: %dth Frame)
IDS_STRINGTABLE_33341=Note: When use LAN/GPRS Modem to communication with sign, 'TEST' command will only be sent to the first IP address/GPRS Modem!
IDS_STRINGTABLE_33343=Note: When use LAN/GPRS Modem to communication with sign, 'READ' command will only be sent to the first IP  Address/GPRS Mode!


!!!!!!!!!!!!!!!!!CAUTION: User must change  IDS_STRINGTABLE_32984 from IDS_STRINGTABLE_32984=The %dth sending(Total FrameS: %d,  Now: %dth Frame) to 
IDS_STRINGTABLE_32984=The %dth sending %s (Total FrameS: %d,  Now: %dth Frame) when using old file "Multi_eng.ini" , otherwise program will collapse when sending message to sign.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////





///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-03-06 Update from V3.20 to V3.2.1.0
Correct some spelling mistake.



If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:
IDS_STRINGTABLE_33344=Available Graphic Files
IDS_STRINGTABLE_33345=Size of Graphic
IDS_STRINGTABLE_33346=Update graphic file



Change naming mode of version. For example, the old mode is V3.20, now change to V3.2.0.0
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////




///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-01-21 Update from V3.19 to V3.20
New function: Use SoftwareSet.ini to set the parameters for communication

The format is as follow:

[Settings for Communication]
//If this value <=0, software will set it to 1
Time for Repeating send=3

//Unit is milli-second.
//If these values are too small, it will cause communication failed!
Time out for Modem connection=13000
Time out for LAN / RS232 connection=6500

//If the communication is not stable, please minish this value. But if this value is too small, it is inefficient
//This value must be <= 1000, and > 10
Number for Frame=1000


Note: Value for 'Time for Repeating send' is: When sending failed, software will try to send it again. This value is the times for sending when send failed.

Value for 'Time out for Modem connection' or 'Time out for LAN / RS232 connection' is: After software send message to sign, software will receive the handshake from sign to confirm whether the sign has recieve the message correctly. If software has not receive the handshake for a period of time, software will think the communication is failed. The two value is define the 'period of time'.

Value for 'Number for Frame' is: This value is define how much bytes in one package which sent to sign at one time. This value is more smaller, the communication is more stable. But if this value is too small, it is inefficient.



If the communication is OK, please don't modify these values.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2008-01-18, Update from V3.18 to V3.19 
New function: Use SoftwareSet.ini to set the default font.
Note: SoftwareSet.ini must be placed the same folder with E2000TP.exe. 
	If have not SoftwareSet.ini file , software will use SS7 as the default font.
	If the font, which set in softwareset.ini,  is invalid, software will use SS7 as the default font.


The format, which set the default font in SoftwareSet.ini is as follow:
[Default]
font=SS16
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-12-04, Update from V3.17 to V3.18
Fixed one bug:
When PC is Dual core processor, the system function Sleep(), which is to delay time, has error, so it will cause some problem. Now correct it.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-10-16, update from V3.16 to V3.17
Fixed one bug:
For example: assume the width for sign is 160, the height for sign is 32,  insert WINDOW, and select USER-DEFINED type, when drag the right side of WINDOW to resize the WINDOW, program will set the height for this WINDOW to 128(you know, it is impossible, because the height for sign is 32), last when you move the window, the left for this WINDOW will be set to 65440, so the WINDOW will disappear.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////





///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-09-08, update from V3.15 to V3.16
In old version, when use LAN to communication with sign, user can not send one file to multi-sign at the same time. In this version, user can input multi-IP Address in one IP Group, these IP Address separate by comma. When sending, prorgam will send the file to these IP Address automatically.




If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:

IDD176_1193=Note: If one group has multi-IP Address, please separate by comma

IDS_STRINGTABLE_33341=Note: When use LAN to communication with sign, 'TEST' command will only be sent to the first IP Address!
IDS_STRINGTABLE_33342=Note: When sent 'TEST' command to sign, if specify multi-sign address, this command will be sent to the first sign address.
IDS_STRINGTABLE_33343=Note: When use LAN to communication with sign, 'READ' command will only be sent to the first IP Address!





And modify string IDS_STRINGTABLE_32969 from 

IDS_STRINGTABLE_32969=Sorry,you only can input one address when read information from bios!

TO

IDS_STRINGTABLE_32969=Note: When sent 'READ' command to sign, if specify multi-sign address, this command will be sent to the first sign address.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////




///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-08-25, update from V3.14 to V3.15

Fixed these bugs as follow:
When use MODEM to communicate with sign, if the MODEM on PC's side is GSM MODEM, can not send data to sign. Program will say"The connect by modem is hang up because some error".
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-03-30, update from V3.13 to V3.14
This version is updated for some words can't be translated to native language.

Fixed these bugs as follow:
1)When insert move speed and pause time, the characters string on dialog, such as "Move Speed", "Pause time" can not be translated.
2)When insert row space, the characters string "VS" in combo box can not be translated
3)The caption of main frame window can not be translated
4)When open file or save file, the caption of file dialog for selecting file, such as "Open", "Save As", can not be translated
5)When the contents has been edited, and then close program, program will display one dialog to prompt user to save changes, in this dialog ,the characters string "Save Changes to XXX" can not be translated.


	If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:

IDS_STRINGTABLE_33329=Normal characters in '%s' font (in %s): //this sentence has exist in version V3.13

IDS_STRINGTABLE_33330=VS

IDS_STRINGTABLE_33331=Sunday
IDS_STRINGTABLE_33332=Monday
IDS_STRINGTABLE_33333=Tuesday
IDS_STRINGTABLE_33334=Wednesday
IDS_STRINGTABLE_33335=Thursday
IDS_STRINGTABLE_33336=Friday
IDS_STRINGTABLE_33337=Saturday

IDS_STRINGTABLE_33338=Save changes to %s

IDS_STRINGTABLE_33339=Open
IDS_STRINGTABLE_33340=Save As

	If user only want a new file "Multi_eng.ini", please close program "E2000TP.exe", delete the old file "Multi_eng.ini", and run "E2000TP.exe" again, program will create a new file "Multi_eng.ini".
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////


///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-03-05, update from V3.12 to V3.13
	Normal Characters is mean that the ASCII is from 0x20 to 0x7f
	Special European Characters is mean that the ASCII is from 0x80 to 0xff

	1)Fixed one bug: If user create a new font, which has not special characters, when select menu "Insert\Special European Characters", program will show "Out of Memory" error box, and the program will collapse.
	2)Fixed one bug: If user create a new font, which has not normal characters, when select menu "Insert\Special European Characters", program can not display the special characters.
	3)Update: Now user can select menu "Insert\Normal/Special European Characters" to insert normal characters .
	4)Update: When translate the string characters from english to another language, some words is longer than english words, so some words 
		can not be placed in dialog fully, now widen some controls on dialog in oder to place more characters.
	5)Update: In old version, the help at the bottom of the window when user highlight a choice in the menu bar can not be translated to native 
		language.	Now correct it.
	6)Update: In old version, the date's format , which is in schedule dialog(select menu "Update>Schedule..." will see this dialog), is fixed to 
		"Year-Month-Day" , now the date's format is same as the date's format of the windows system.


	If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:

...
IDD172_1079=Insert	//this sentence has exist in version V3.12

IDD31001_Title=Normal characters
IDD31001_1079=Insert

...
IDS_STRINGTABLE_33327=[H-Right,V-ottom]	//this sentence has exist in version V3.12
IDS_STRINGTABLE_33328=Insert NORMAL/SPECIAL characters
IDS_STRINGTABLE_33329=Normal characters in '%s' font (in %s):

	If user only want a new file "Multi_eng.ini", please close program "E2000TP.exe", delete the old file "Multi_eng.ini", and run "E2000TP.exe" again, program will create a new file "Multi_eng.ini".
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////



///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
2007-02-27, update from V3.11 to V3.12
	Because: In old version, some words in "Property Window" can not be translated to native language, for example, char color:[ACL], [RED],..., Move Method:[IMMED], [SLIDE <-],...
	If user has translated file "Multi_eng.ini" to native lauguage, please add these sentences to file "Multi_eng.ini" as follow, and translate these sentences to native lauguage:

IDS_STRINGTABLE_33187=Flash	//this sentence has exist in version V3.11

IDS_STRINGTABLE_33188=Property

IDS_STRINGTABLE_33189=[ACL]
IDS_STRINGTABLE_33190=[RED]
IDS_STRINGTABLE_33191=[GRN]
IDS_STRINGTABLE_33192=[YEL]
IDS_STRINGTABLE_33193=[RB1]
IDS_STRINGTABLE_33194=[RB2]
IDS_STRINGTABLE_33195=[RB3]
IDS_STRINGTABLE_33196=[RB4]
IDS_STRINGTABLE_33197=[RB5]
IDS_STRINGTABLE_33198=[MIX1]
IDS_STRINGTABLE_33199=[MIX2]
IDS_STRINGTABLE_33200=[MIX3]
IDS_STRINGTABLE_33201=[MIX4]
IDS_STRINGTABLE_33202=[MIX5]
IDS_STRINGTABLE_33203=[MIX6]
IDS_STRINGTABLE_33204=[MIX7]
IDS_STRINGTABLE_33205=[MIX8]

IDS_STRINGTABLE_33206=[NORMAL]
IDS_STRINGTABLE_33207=[BOLD]
IDS_STRINGTABLE_33208=[WIDEN]

IDS_STRINGTABLE_33209=[No Flash]
IDS_STRINGTABLE_33210=[Flash]


IDS_STRINGTABLE_33211=[AUTO]
IDS_STRINGTABLE_33212=[IMMED]
IDS_STRINGTABLE_33213=[SLIDE<-]
IDS_STRINGTABLE_33214=[SLIDE->]
IDS_STRINGTABLE_33215=[SLIDE<->]
IDS_STRINGTABLE_33216=[SLIDE-><-]
IDS_STRINGTABLE_33217=[SLIDE UP]
IDS_STRINGTABLE_33218=[SLIDE DOWN]
IDS_STRINGTABLE_33219=[COVER<-]
IDS_STRINGTABLE_33220=[COVER->]
IDS_STRINGTABLE_33221=[COVER<-->]
IDS_STRINGTABLE_33222=[COVER-><-]
IDS_STRINGTABLE_33223=[COVER UP]
IDS_STRINGTABLE_33224=[COVER DOWN]
IDS_STRINGTABLE_33225=[ROLL<-]
IDS_STRINGTABLE_33226=[ROLL->]
IDS_STRINGTABLE_33227=[ROLL<-->]
IDS_STRINGTABLE_33228=[ROLL-><-]
IDS_STRINGTABLE_33229=[ROLL UP]
IDS_STRINGTABLE_33230=[ROLL DOWN]
IDS_STRINGTABLE_33231=[INSLID1]
IDS_STRINGTABLE_33232=[INSLID2]
IDS_STRINGTABLE_33233=[INSLID3]
IDS_STRINGTABLE_33234=[INSLID4]
IDS_STRINGTABLE_33235=[INROLL1]
IDS_STRINGTABLE_33236=[INROLL2]
IDS_STRINGTABLE_33237=[INROLL3]
IDS_STRINGTABLE_33238=[INROLL4]
IDS_STRINGTABLE_33239=[INROLL5]
IDS_STRINGTABLE_33240=[INROLL6]
IDS_STRINGTABLE_33241=[SHUTT1]
IDS_STRINGTABLE_33242=[SHUTT2]
IDS_STRINGTABLE_33243=[SHUTT3]
IDS_STRINGTABLE_33244=[SHUTT4]
IDS_STRINGTABLE_33245=[JUMP]
IDS_STRINGTABLE_33246=[SNOW]
IDS_STRINGTABLE_33247=[RANDOM]
IDS_STRINGTABLE_33248=[SHOOT]
IDS_STRINGTABLE_33249=[EXPLODE]
IDS_STRINGTABLE_33250=[TWINKLE]
IDS_STRINGTABLE_33251=[FLASH]
IDS_STRINGTABLE_33252=[PACMAN]
IDS_STRINGTABLE_33253=[SCROLL]
IDS_STRINGTABLE_33254=[ROTATE]
IDS_STRINGTABLE_33255=[NONE]

IDS_STRINGTABLE_33256=Beep 1
IDS_STRINGTABLE_33257=Beep 2
IDS_STRINGTABLE_33258=Beep 3

IDS_STRINGTABLE_33259=[Speed 1(Slowest)]
IDS_STRINGTABLE_33260=[Speed 2]
IDS_STRINGTABLE_33261=[Speed 3]
IDS_STRINGTABLE_33262=[Speed 4]
IDS_STRINGTABLE_33263=[Speed 5]
IDS_STRINGTABLE_33264=[Speed 6]
IDS_STRINGTABLE_33265=[Speed 7]
IDS_STRINGTABLE_33266=[Speed 8(Fastest)]


IDS_STRINGTABLE_33267=[NO PAU]
IDS_STRINGTABLE_33268=[PAU 1S]
IDS_STRINGTABLE_33269=[PAU 2S]
IDS_STRINGTABLE_33270=[PAU 3S]
IDS_STRINGTABLE_33271=[PAU 5S]
IDS_STRINGTABLE_33272=[PAU 10S]
IDS_STRINGTABLE_33273=[PAU 30S]
IDS_STRINGTABLE_33274=[PAU 60S]

IDS_STRINGTABLE_33275=Time1(23:59)
IDS_STRINGTABLE_33276=Time2(23:59:59)
IDS_STRINGTABLE_33277=Time3(11:59 pm)
IDS_STRINGTABLE_33278=Time4(11:59:59 pm)
IDS_STRINGTABLE_33279=Date1(31 Dec 2001)
IDS_STRINGTABLE_33280=Date2(Dec 31, 2001)
IDS_STRINGTABLE_33281=Date3(31/12/2001)
IDS_STRINGTABLE_33282=Date4(12/31/2001)
IDS_STRINGTABLE_33283=Date5(2001.12.31)
IDS_STRINGTABLE_33284=Hour-24
IDS_STRINGTABLE_33285=Hour-12
IDS_STRINGTABLE_33286=Minute
IDS_STRINGTABLE_33287=Second
IDS_STRINGTABLE_33288=AM/PM
IDS_STRINGTABLE_33289=A/P
IDS_STRINGTABLE_33290=am/pm
IDS_STRINGTABLE_33291=a/p
IDS_STRINGTABLE_33292=Week1(Mon)
IDS_STRINGTABLE_33293=Week2(Monday)
IDS_STRINGTABLE_33294=Week3(MON)
IDS_STRINGTABLE_33295=Week4(MONDAY)
IDS_STRINGTABLE_33296=Day(1)
IDS_STRINGTABLE_33297=Day(st)
IDS_STRINGTABLE_33298=Day(ST)
IDS_STRINGTABLE_33299=Month1(Dec)
IDS_STRINGTABLE_33300=Month2(December)
IDS_STRINGTABLE_33301=Month3(12)
IDS_STRINGTABLE_33302=Month4(DEC)
IDS_STRINGTABLE_33303=Month5(DECEMBER)
IDS_STRINGTABLE_33304=Year(2001)
IDS_STRINGTABLE_33305=Year(01)

IDS_STRINGTABLE_33306=Celsius
IDS_STRINGTABLE_33307=Fahrenheit
IDS_STRINGTABLE_33308=Absolute Temperature

IDS_STRINGTABLE_33309=With days
IDS_STRINGTABLE_33310=With hours
IDS_STRINGTABLE_33311=With minutes
IDS_STRINGTABLE_33312=With seconds

IDS_STRINGTABLE_33313=DE-Counter
IDS_STRINGTABLE_33314=IN-Counter

IDS_STRINGTABLE_33315=With days
IDS_STRINGTABLE_33316=With hours
IDS_STRINGTABLE_33317=With minutes
IDS_STRINGTABLE_33318=With seconds

IDS_STRINGTABLE_33319=[H-Left,V-Top]
IDS_STRINGTABLE_33320=[H-Center,V-Top]
IDS_STRINGTABLE_33321=[H-Right,V-Top]
IDS_STRINGTABLE_33322=[H-Left,V-Center]
IDS_STRINGTABLE_33323=[H-Center,V-Center]
IDS_STRINGTABLE_33324=[H-Right,V-Center]
IDS_STRINGTABLE_33325=[H-Left,V-Bottom]
IDS_STRINGTABLE_33326=[H-Center,V-Bottom]
IDS_STRINGTABLE_33327=[H-Right,V-Bottom]


	If user only want a new file "Multi_eng.ini", please close program "E2000TP.exe", delete the old file "Multi_eng.ini", and run "E2000TP.exe" again, program will create a new file "Multi_eng.ini".

	Note: "IDS_STRINGTABLE_33188=Property" is for "Property Window" caption.
	          "IDS_STRINGTABLE_33087=Property" is for char property["NORMAL, BOLD, WIDEN"] in "Property Window"
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////